Manifest
What the build takes
- Baltic birch, 18mm sheet×1
- Full-extension slides, 450mm×3
- Locking casters, 100mm×4
- Track saw
- Pocket-hole jig
- Router, 45 deg bit
Sequence
The build, step by step
BUILD MODE — TAP A NUMBER TO CHECK OFF0/5
Break down the sheet
Label the plywood before the first cut and follow the sheet map from largest panels to smallest dividers. Leave track-saw offcuts oversized until the carcass is dry-fit; they become drawer parts later.
Case joinery
Assemble the cabinet on a flat floor with pocket screws facing inward. Check diagonals before tightening the final screws, because the drawer slides will punish even a small twist.
Hang the drawers
🔒 Unlocks with the planCut the cleats
🔒 Unlocks with the planCasters and load test
🔒 Unlocks with the planRead first
Safety & disclaimers
Support offcuts when ripping cleats; kickback is real.
Field notes
Questions builders ask
Circular saw instead of track saw?
Yes, with a straightedge guide; the map allows for the kerf.
Next sheets
